IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 643

Display Character with "*"
■
Select this check box to display the entered characters as * (asterisks).
If this check box is selected, nothing is displayed until a value is entered from the key buttons or keypad when the
Character Input is in entry mode. If ENT is pressed with nothing displayed, 0 is written to the destination device address.
Change Font with Device Address
■
Select this check box to change the font used to display the text with a value of device address.
The keypad (popup screen) can also be changed when Standard(Half-Width Character), Standard(Hiragana)
or Popup is selected for Type under Keypad on the General tab.
Trigger Device Address: Specifies the word device (2 words) to use as the condition to change the font.
Change Display Colors
■
Select this check box to switch the text and plate colors.
Trigger Device Address
Trigger Device Address
Trigger Device Address: Specifies the bit device or the bit number of the word device to use as the trigger to switch
Text Color:
Plate Color:
*1 Advanced mode only
*1
*1
Click to display the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 "5.1 Device Address Settings" on page 2-68.
1st word 2nd word
Font number Popup screen No.
Example: With Trigger Device Address set to D100, to enter Central European text from
popup screen 100 using a Character Input for entering European text from the
standard keypad (popup screen 3003)
Write 6 to D100 and 100 to D101.
External device
0
1
the text and plate colors.
Click to display the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 "5.1 Device Address Settings" on page 2-68.
When the value of device address is 0, the color specified in Text Color or in Plate Color
on the View tab will be displayed.
When the value of device address is 1, the color displayed and specified in Text Color or
Plate Color
under the Change Display Colors.
Selects the color (color: 256 colors, monochrome: 16 shades) of the text when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.
Selects the plate color (color: 256 colors, monochrome: 16 shades) when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.
This option can only be configured when Standard is selected for Image Type on the View
tab.
WindO/I-NV4 User's Manual
Font number
3rd word
Popup screen No.
MICRO/I
Text Color
Plate Color on the View tab
HG SERIES
Text Color under Change Display Colors
Plate Color under Change Display Colors
HG SERIES
2 Character Input
1: Japanese
2: European
6: Central European
7: Baltic
8: Cyrillic
1 to 3015
10
10-37