Chapter 13 Alarm Log Function; Overview; How The Alarm Log Function Is Used - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

Chapter 13
This chapter describes how to configure the Alarm Log function and its operation on the MICRO/I.
1

Overview

1.1 How the Alarm Log Function is Used

The Alarm Log function samples the occurrence of alarms and recovery information by monitoring and evaluating the
state of device addresses.
The Alarm Log function can perform the following functions.
• Monitor states of device addresses and create Alarm Log data
0
12:00
1
12:53
• Monitor states of device addresses and detect alarms
0
• Display an alarm screen when an alarm occurs
0
• Make a sound of the buzzer and screen flashing the screen when an alarm occurs
0
Alarm Log Function
HG5G-V HG4G-V
External device
1
0
External device
1
External device
1
External device
1
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V HG2G-5F
MICRO/I
12:00
Alarm occurred
12:53
12:54
Alarm Log data
No. Message Occurrence Time
1-1 Voltage drop 12/01/2011 12:00:00
MICRO/I
Alarm occurred
MICRO/I
Voltage
Alarm occurred
drop
Alarm screen
MICRO/I
Alarm occurred
HG2G-5T HG1G HG1P
Recovered
Confirmed
Recovery Time Confirmation Time
12/01 12:53:10 12/01 12:54:30
Beep
13-1
13