9 Potentiometer
9.3 Properties of Potentiometer Dialog Box
This section describes items and buttons in the Properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Data Type
■
Select the data type to be handled by the Potentiometer.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Minimum
■
Specify the minimum value that can be entered. The minimum value differs depending on the data type.
Maximum
■
Specify the maximum value that can be entered. The maximum value differs depending on the data type.
Destination Device Address
■
Specify the destination word device.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
8-162
WindO/I-NV4 User's Manual