Displaying Registered Messages With The Alarm List Display According To The Active Alarm - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4.2

Displaying Registered Messages with the Alarm List Display According to the Active Alarm

1 On the Configuration tab, in the System Setup group, click Alarm Log.
The Alarm Log Settings dialog box is displayed.
2 Select the type of device address to monitor under Source Device Address Type on the Channel tab and specify
Number of Blocks.
3
Select the channel number to register a message to and click Edit.
The Individual Settings dialog box is displayed.
WindO/I-NV4 User's Manual
4 Using Data and Detected Alarms
13-33
13