Data Displays; Numerical Input; How The Numerical Input Is Used - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

Chapter 10
This chapter describes how to configure the Data Display parts and their operation on the MICRO/I.
1

Numerical Input

1.1 How the Numerical Input is Used

The Numerical Input features a display mode that displays the current value of a device address and an entry mode
that enters a value using the keypad or key buttons and writes that value to a device address. When the part is
displayed on the screen, the Numerical Input is in display mode. To enter a value by pressing the keypad or key
buttons, touch the Numerical Input to switch it to entry mode. In entry mode, the value of device address is displayed
until a value is entered.
The Numerical Input can perform the following functions.
• Write a value entered with the keypad or key buttons to a device address
Numerical Input
Standard keypad
• Display the current value of a device address
• Enter and display decimal numbers
• Display the entered value as * (asterisk)

Data Displays

HG5G-V HG4G-V
MICRO/I
999
MICRO/I
1234
MICRO/I
12.30
12.30
MICRO/I
****
****
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G
External device
D100:
999
External device
D100:
External device
12.3
External device
****
HG2G-V HG2G-5F HG2G-5T HG1G HG1P
999
1234
10
10-1