1.3 Properties of Numerical Input Dialog Box
This section describes items and buttons on the properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Methods of using the Numerical Input
■
Selects how to use the Numerical Input:
Use as Numerical Input:
Use as Display for Keypad:
Display the Minimum value specified with Data Over: Uses the Numerical Input as a part to display the minimum
Display the Maximum value specified with Data Over: Uses the Numerical Input as a part to display the maximum
Uses the Numerical Input to enter or display values.
Uses the Numerical Input as a part to display the value entered
with a Keypad.
value of a Numerical Input switched to input mode.
value of a Numerical Input switched to input mode.
WindO/I-NV4 User's Manual
1 Numerical Input
10
10-3