Multi-Command Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

6.2 Multi-Command Configuration Procedure

This section describes the configuration procedure for Multi-Commands.
1
On the Home tab, in the Parts group, click Commands, and then click Multi-Command.
2
Click a point on the edit screen where you wish to place the Multi-Command.
3
Double-click the dropped Multi-Command and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
WindO/I-NV4 User's Manual
6 Multi-Command
12
12-39