IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 896

Micro/i operator interfaces for windo/i-nv4

Table of Contents

2 Word Write Command

Satisfy the condition:

While satisfying the condition:

Selects the data type to be handled by the condition formula.

Can only be set if Satisfy the condition or While satisfying the condition is selected as Trigger Type.

For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.

Device Address

Specifies the bit device or the bit number of the word device to serve as condition.

Can only be set if Rising-edge or Falling-edge is selected as Trigger Type.

to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device

Address Settings" on page 2-68.

Sets the condition formula.

Can only be set if Satisfy the condition or While satisfying the condition is selected as Trigger Type.

to display the Trigger Condition Settings dialog box. For the conditional expression configuration

procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-71.

Used for entering comments about trigger conditions. The maximum number is 80 characters.

Command is executed when condition changes from not satisfied to satisfied.

Not satisfied

The command continues being executed while the condition is satisfied.

Not satisfied

WindO/I-NV4 User's Manual

Execution Execution

Execution Execution

Show Quick Links

Table of Contents