IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 713

Specify Color by Device Address:
Device Address
Upper byte Lower byte
D0= 0 x F 7 0 x 0 0
Upper byte Lower byte
D0= 0 x 1 6 0 x 1 4
Device Address:
Specifies the text and plate colors by the value of the device
address.
External device MICRO/I
HG SERIES
HG SERIES
Specify the word device that stores the color data for the text or plate.
Click to display the Tag Editor. For the device address configuration
procedure, refer to Chapter 2 "5.1 Device Address Settings" on page 2-68.
This uses address number+1 to specify the text and plate colors when the
Flash check box has been selected.
Color data assignments that are stored to device addresses are given below.
bit
Upper byte
15
Device Address
Plate color
Device Address+1 Plate color when flashing
HG SERIES
Flashing
HG SERIES
For color data, refer to Appendix "1 Color Number" on page A-1.
WindO/I-NV4 User's Manual
5 Message Display
Upper byte Lower byte
0 x F 7
D0 0 x 0 0
Plate color Text color
Upper byte Lower byte
D0 0 x 1 6 0 x 1 4
Plate color Text color
bit bit bit
Lower byte
8 7 0
Text color
Text color when flashing
Upper byte Lower byte
0 x 1 6 0 x 1 4
Device Address
Plate color Text color
Upper byte Lower byte
0 x 2 3 0 x F 7
Device Address+1
Plate color Text color
when flashing when flashing
10
10-107