Chapter 14 Data Log Function; Overview; How The Data Log Function Is Used - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

Chapter 14
This chapter describes how to configure the Data Log function and its operation on the MICRO/I.
1

Overview

1.1 How the Data Log Function is Used

The Data Log function samples values of device addresses with the MICRO/I using the configured sampling condition
and Condition of Writing to Data Storage Area. The sampled values of device addresses are saved in internal memory
along with the sampling time.
The Data Log function can perform the following functions.
• Sample values of device addresses at a fixed interval
• Sample values of device addresses when a value of device address changes
0
• Output Data Log data to the external memory device
*1 SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F, USB flash drive for HG2G-5T and HG1G/1P
Data Log Function
HG5G-V HG4G-V
External device
12 : 00
12 : 05
12 : 10
External device
1
MICRO/I
External memory device
Data Log data (CSV)
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V
MICRO/I
MICRO/I
*1
External Memory Device
SD memory card
Output to
USB flash drive
HG2G-5F HG2G-5T HG1G HG1P
D100 : 0
D100 : 55
D100 : 123
D100 : 123
14-1
14