IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 127

Using Inching Function
1
On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
2
Click the Communication Interface Tab in the Project Settings dialog box.
3 Select the interface for user communication under Interface Configuration, and then select the User
*1
Communication 1 in Function under Interface Settings.
*1 Inching function can be configured only for User Communication 1.
HG5G-V HG4G-V HG4G HG3G-V
WindO/I-NV4 User's Manual
5 User Communication
HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P
3
3-21