Project Settings Dialog Box; System Tab - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3

Project Settings Dialog Box

This section describes items and buttons on the Project Settings dialog box.

3.1 System Tab

The System tab is used to configure MICRO/I operations for the project data overall.
Screen Number Format
■
Selects the type of data to use for the System Area 1 Display screen number (address number+0) as BCD or BIN.
Default Screen: Specifies the screen number of the base screen to display first when the MICRO/I is turned on (0 to
3000). When 0 is specified, the MICRO/I is in the screen waiting state. Write a screen number to
System Area 1 Display screen number (address number+0) or specify the default screen number
from 1 to 3000.
Start Time (sec)
■
Specifies the time from when the MICRO/I power is turned on until communications start with the external device
(0 to 9999 seconds).
HG5G-V HG4G-V HG4G HG3G-V
HG5G-V HG4G-V HG4G HG3G-V
WindO/I-NV4 User's Manual
3 Project Settings Dialog Box
HG3G HG2G-V HG2G-5F HG2G-5T
HG3G HG2G-V HG2G-5F HG2G-5T
HG1G HG1P
4
HG1G HG1P
4-25