Alarm Log Display; How The Alarm Log Display Is Used - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

8 Alarm Log Display

8 Alarm Log Display

8.1 How the Alarm Log Display is Used

The Alarm Log Display displays Alarm Log data saved in the data storage area.
• List the message, the occurrence time, recovery time, and confirmation time for the alarms that have occurred
0
12 : 00
1
12 : 53
• Display the reference screen for alarms that have occurred
Show focus
Slct
Time Message
Up
09:15 Motor fault
Dwn
10:02 Pump1 fault
Del
10:28 High pressure
13:02 Pump 1 fault Ref.
Key Bu on
Only one Alarm List Display or Alarm Log Display can be displayed in a screen.
• For the key buttons used with the Alarm Log Display, refer to Chapter 8 "Alarm Log Display" on page 8-
96.
• When the Operate the Alarm on List directly check box on the General tab in the Properties of
Alarm Log Display dialog box is selected, a displayed alarm can be given focus by pressing it on the list.
• The number of lines from the start line to the selected line of the message displayed on the Alarm Log
Display is stored in HMI Special Data Register LSD56.
10-152
HG5G-V HG4G-V
External device
1
0
Occurrence time
Message
Move focus
Slct
Time Message
Up
09:15 Motor fault
Dwn
10:02 Pump1 fault
Del
10:28 High pressure
13:02 Pump 1 fault Ref.
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V
MICRO/I
Occurrence Message Recovered Confirmed
12/01 12 : 00 Current fault 12 : 53 12 : 54
Select Up Down Check Delete
Occurrence Message Recovered Confirmed
12/01 12 : 00 Current fault 12 : 53
Select Check
Up Down
Display reference screen
Slct
Time Message
Up
09:15 Motor fault
Dwn
10:02 Pump1 fault
Del
10:28 High pressure
13:02 Pump 1 fault Ref.
HG2G-5F HG2G-5T HG1G HG1P
12 : 00
Alarm occurred
12 : 53 Recovered
12 : 54 Confirmed
12 : 54
Confirmation time
Recovery time
Delete
Slct
Time Message
Pump 1 fault Pump 1 fault Up
09:15 Motor fault
Pump 1 output low
Dwn
10:02 Pump1 fault
Press Stop, check the air,
Del
10:28 High pressure then press Start.
Air Press.
13:02 Pump 1 fault Ref.
0000
Stop Start
kg/m 2
Reference screen