IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 596

2 Multi-State Lamp
View Tab
●
Image Type
■
Select the type of graphic to be used to represent the part.
Standard: Uses the default graphic for WindO/I-NV4.
Picture: Uses an image file saved using Picture Manager.
For details about image file restrictions, refer to Chapter 2 "1.4 Available Image Files" on page 2-20.
Coordinates
■
X, Y: Sets the display position of parts using coordinates.
The X and Y coordinates of parts is defined relative to an origin at the top-left corner of the screen.
X:
Y:
Size
■
Sets width and height to define the size of parts. The minimum size varies based on the item selected for Image Type.
Standard: The minimum size varies based on the selected item and the maximum size is a base screen size.
Picture: W:
H:
9-22
0 to (base screen horizontal size - 1)
0 to (base screen vertical size - 1)
(0, 0)
Y
2 to (base screen horizontal size)
2 to (base screen vertical size)
Height
WindO/I-NV4 User's Manual
X
Screen
Parts
Width
Screen
Parts