Properties Of Key Button Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

5.3 Properties of Key Button Dialog Box

This section describes items and buttons on the properties dialog box.
General Tab
●
Displays settings
applicable to the
selected key.
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
>>OFF Text, >>ON Text
■
Applies the text entered in the Part Name field to the Text field under the OFF or ON fields on the Registration
Text tab. This is used as the Registration Text when the button is OFF or ON.
To specify the Registration Text to use when the button is ON, select the Set by State check box on the
Registration Text tab. If left unchecked, the same Registration Text assigned for the OFF state is
displayed for the ON state as well.
Key Type
■
Select the function for the Key Button.
Language: Switches the display of the key that is displayed when Keypad is selected in Key Browser. These
languages are available:
Japanese, European, Central European, Baltic, Cyrillic.
Browse: Opens the Key Browser when clicked. Select a key.
For details, refer to "5.5 Key Browser" on page 8-98.
(Key): Displays the name of the key selected using the Key Browser.
• When you select a key, the label for that key is assigned as the Registration Text.
• The function of Key Button will affect on the next scan when the trigger condition is satisfied.
The settings explained below appear depending on the type of key selected.
WindO/I-NV4 User's Manual
5 Key Button
(Key)
8
8-75