IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 444

3 Goto Screen Button
Action Mode
■
Select the behavior of the button from the following:
Back to previous Screen:
Switch to Base Screen:
Open Popup Screen:
Close Popup Screen:
Open Device Monitor Screen:
Close Device Monitor Screen:
Open Password Screen:
Close Password Screen:
Open Adjust Brightness Screen:
Close Adjust Brightness Screen:
Open File Screen for movie files
Close File Screen for movie files
Switch to System Mode:
Reset current screen:
Open User Account Setting Screen:
When the current Base Screen is reset using the Reset current screen function, the window and internal
devices restart as if the Base Screens were switched.
*1 This is applicable for models with a video interface only.
8-42
Switches to the previous screen. Returns to up to 16 earlier screens.
Switches between Base Screen. For details, refer to Chapter 5 "3 Base Screen"
on page 5-14.
Opens a Popup Screen. For details, refer to Chapter 5 "4 Popup Screen" on
page 5-20.
Closes a Popup Screen. For details, refer to Chapter 5 "4 Popup Screen" on
page 5-20.
Opens the Device Monitor Screen. For details, refer to Chapter 25 "2.2 Device
Monitor" on page 25-21.
Closes the Device Monitor Screen. For details, refer to Chapter 25 "2.2 Device
Monitor" on page 25-21.
Opens the Password Screen. For details, refer to Chapter 23 "4.1 Entering the
Password on the MICRO/I" on page 23-46.
Closes the Password Screen. For details, refer to Chapter 23 "4.1 Entering the
Password on the MICRO/I" on page 23-46.
Opens the Adjust Brightness Screen. For details, refer to Chapter 34 "1.3
Adjusting Screen Brightness" on page 34-2.
Closes the Adjust Brightness Screen. For details, refer to Chapter 34 "1.3
Adjusting Screen Brightness" on page 34-2.
*1
: Opens the File Screen. For details, refer to Chapter 10 "4.4 File Screen" on
page 10-92.
*1
Closes the File Screen. For details, refer to Chapter 10 "4.4 File Screen" on
:
page 10-92.
Switches to the Top Page in the System Mode. For details, refer to Chapter 34
"2 System Mode Overview" on page 34-3.
Resets the current Base Screen.
Opens the User Account Setting Screen. For details, refer to Chapter 23 "5
Editing User Accounts on the MICRO/I" on page 23-49.
When User Account Setting Screen is selected, the Configure
Processing Area of User Account Setting Screen dialog box will be
displayed. For details, refer to " Configure Processing Area of User Account
Setting Screen Dialog Box" on page 8-44.
Specify the word device to use as the processing area of the User Account
Setting Screen and click OK. When you return to the properties dialog box,
Edit will be displayed.
Edit: Click this button to display the Configure Processing Area of User
Account Setting Screen dialog box.
WindO/I-NV4 User's Manual