3 Project Settings Dialog Box
3.13 FTP Server Tab
The FTP Server tab configures the MICRO/I's FTP Server function. For details, refer to Chapter 28 "2 FTP Server
Function" on page 28-18.
(Data Type)
Enable FTP Server function
■
Select this box to enable FTP Server function.
This allows the FTP client to read or write the file contained in the external memory device inserted in the MICRO/I.
Port Number
■
Specifies the TCP port number to use for the FTP server function (0 to 65535).
Regarding TCP port number of MICRO/I, note the following points.
The numbers that cannot be used:
Duplicate numbers cannot be configured in the following functions:
4-66
HG5G-V HG4G-V
HG4G
• 2538 (for pass-through)
• 2101 (for FC4A Series MicroSmart direct connection pass-through)
• Maintenance communication
( refer to "Port Number" on page 4-40)
• Web server function ( refer to "Port Number" on page 4-65)
• FTP server function
• TCP Server is selected for the User Communication
( refer to "Port No." on page 4-42)
• Modbus as Manufacture and Modbus TCP Server as
Communication Driver are selected on the Communication
Driver tab
( refer to the WindO/I-NV4 External Device Setup Manual)
• YASKAWA Electric as Manufacture and MP2000(Ethernet) as
Communication Driver are selected on the Communication
Driver tab
( refer to the WindO/I-NV4 External Device Setup Manual)
WindO/I-NV4 User's Manual
HG3G-V
HG3G
HG2G-V
HG2G-5F
HG2G-5T
HG1G HG1P