IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 269

Screen
Print Range
■
Screen Type:
Screen List:
Print Content
■
Select the print target to print from Basic or Advanced.
Print Object List:
Screen Image
■
State:
Invert white and black:
Display Object No.:
Show Part Name:
Show Device Address:
Select the screens to print from the following items.
All, Base Screen, Popup Screen
This list shows screens that have already been created. Select the check boxes of the
screens to print.
Select this check box to print the object list.
Select the items of data that will be output when printing the object list. Select the check
boxes of the items to output.
Name, Type, Text ID, Text, Device Address, Trigger Type/Trigger Condition,
Trigger Type(visible)/Trigger Condition(visible)
Changes the state of the parts for printing. Select the state from the following items.
OFF, ON, ON, OFF (Both)
Select this to print the screen by inverting the colors so white is black and black is white.
Select this check box to display and print object numbers.
Select this to print the screen by displaying part names.
Select this to print the screen by displaying device addresses.
WindO/I-NV4 User's Manual
1 Creating and Manipulating WindO/I-NV4 Project Data
4
4-15