Properties Of Picture Display Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

3 Picture Display

3.3 Properties of Picture Display Dialog Box

This section describes items and buttons on the properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Switching Method
■
Specifies the method for switching pictures to display from the following. Register pictures in Picture List on the
View tab.
Bit Number: Switches the picture to display according to the status of bits in a device address.
Example: When Bit Number is selected and the bits of trigger device address D0 are allocated to
10-60
the following pictures.
bit15
Trigger device address D0
Picture
Pic2
Switches the picture to display according to the status of the bits.
Trigger device address
0001
D0 bit state
Picture to display
Pic 0
Display picture
Action
for bit 0
WindO/I-NV4 User's Manual
bit3 bit0
Pic1 Pic0
0010 0100
Pic 1 Pic 2
Display picture Display picture
No picture
for bit 1 for bit 2
If all bits in the device address are 0 or if a bit with
no associated picture becomes 1, display nothing.
If multiple bits are 1, display the
picture for the lowest order bit.
1000 1110 1100
Pic 1 Pic 2
Display picture Display picture
for bit 1 for bit 2