IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 726

6 Message Switching Display
Value: Switches the message to display according to the value of a device address.
Example: When Value is selected and the trigger device addresses D0 are allocated to the following
Trigger Device Address
■
Specifies the word device to use as the condition for switching messages.
Click to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-68.
10-120
messages.
Value of Trigger Device Address D0
Switches the message to display according to the value of the device address.
Value of
Trigger Device Address D0
Message to display
Drying
Action
Display Msg0
WindO/I-NV4 User's Manual
Message details
Drying
0 : Msg0
Heating
1 : Msg1
Cooling
2 : Msg2
0 1
Heating
Msg0 Msg1
Display Msg1
2 3
Cooling
Msg2
Display Msg2 No message
If the value of device address has no message
associated with it, display nothing.