IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 568

Micro/i operator interfaces for windo/i-nv4

Table of Contents

9 Potentiometer

While satisfying the condition: Enables the Potentiometer when the condition is satisfied.

Selects the type of data handled by the conditional expression for the input condition.

This option can only be configured if While satisfying the condition is selected for Trigger Type.

For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.

Device Address: Specifies the bit device or the bit number of the word device to serve as the input condition.

This option can only be configured when While ON or While OFF is selected for Trigger Type.

"5.1 Device Address Settings" on page 2-68.

Specifies the conditional expression for the input condition.

This option can only be configured when While satisfying the condition is selected for Trigger

configuration procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-71.

Used for entering a comment for the input condition. The maximum number is 80 characters.

Visible Condition

The Potentiometer is displayed while the condition is satisfied. The Potentiometer is hidden while the condition is not

Example: When Trigger Type is While ON and Device Address is LM0

While LM0 is 0, the condition is not satisfied and the Potentiometer is hidden.

While LM0 is 1, the condition is satisfied and the Potentiometer is displayed.

When a hidden Potentiometer is redisplayed, the slider is displayed at the position specified by the value of

device address.

Enables the Potentiometer when the value of device address is 0.

device address

Potentiometer

Not satisfied

Potentiometer

to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2

to display the Trigger Condition Settings dialog box. For the conditional expression

WindO/I-NV4 User's Manual

Show Quick Links

Table of Contents