No External Devices; Overview; No External Devices Settings - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4

No External Devices

4.1 Overview

In this case, there is no communication with an external device, so the MICRO/I operates as a standalone unit.
It is only possible to operate the MICRO/I with relays and registers.

4.2 No External Devices Settings

No external devices settings are selected on the Select Communication Driver dialog box, or the Communication
Driver tab on the Project Settings dialog box.
• When creating new project data by following displayed dialog boxes and configuring settings step by step, by
clicking , and then clicking New, the Select Communication Driver dialog box is displayed. For details, refer
to Chapter 4 "Create new project data by using the interactive quick start" on page 4-1.
• Click Communication Driver on the status bar to display the Communication Driver tab on the Project
Settings dialog box. For details, refer to Chapter 4 "Changing Communication Drivers" on page 4-21.
Select No External Devices in Manufacturer.
HG5G-V HG4G-V HG4G HG3G-V
MICRO/I
No external device
Internal device
WindO/I-NV4 User's Manual
4 No External Devices
HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P
3
3-7