IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 973

Options Tab
●
The Options tab is used to configure whether or not the MICRO/I's internal buzzer operates and the screen flashing.
Trigger Buzzer when Alarm occurs
■
Select this check box to sound a beep when an alarm has occurred.
Screen flashing when Alarm occurs
■
Select this check box to have the screen flash when an alarm occurs.
Buzzer and Screen Flashing
■
This item selects the condition for the alarm to sound the buzzer or to flash the screen. This item can only be
configured when the Buzzer when Alarm occurs or the Screen flashing when Alarms occurs is selected.
All Alarms: The buzzer is triggered and the screen flashing each time an alarm occur.
Only First Alarm: The buzzer is triggered and the screen flashing only when the first alarm
No beeps will sound and no screen will flash when another alarm is already active.
Stop the Sound of the Buzzer and Screen flashing
■
Select the check box for the items that will trigger the sound of the buzzer and screen flashing to stop.
When touch everywhere on the screen:
When press CHECK or All Chk. button:
When all Alarms are recovered:
*1 The first alarm that has occurred in a state where no alarms are active
The sound of the buzzer and screen flashing stops when you touch
anywhere on the screen.
The sound of the buzzer and screen flashing stops when you touch the
key buttons CHECK or All Chk. on the Alarm Log Display.
The sound of the buzzer and screen flashing stops when all the alarms
are recovered from.
WindO/I-NV4 User's Manual
3 Alarm Log Settings Dialog Box
*1
occurs.
13-29
13