Sub Host Communication Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

6.4 Sub Host Communication Configuration Procedure

This section describes the configuration procedure for Sub Host Communication.
Setting Sub Host Communication for a communication interface
●
1
On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box appears.
2 Click the Communication Interface tab.
3
Select the interface for Sub Host Communication under Interface Configuration, and then select the Sub Host
Communication in Function under Interface Settings.
The Sub Host Communication tab is displayed.
Serial Interface (COM1
more interfaces cannot be used at the same time.
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 HG1G/1P only
*3 HG2G-5T only
*1 *1 *2
, COM2 , COM , or SERIAL1
WindO/I-NV4 User's Manual
6 Sub Host Communication
*3
) can be used for Sub Host Communication. Two or
3
3-89