IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 227

Binary Output Object
Use these settings to configure device addresses for Present_Value of the Binary Output object.
Device Control
■
Device Control of Present_Value is Enable. A constant value cannot be configured for Present_Value of the
Binary Output object.
Allocate device addresses to Present_Value
Configure the parameters in the Present_Value Settings dialog box.
Device for Present_Value
■
Configures the device address to store Present_Value.
WindO/I-NV4 User's Manual
7 BACnet Communication
3-121
3