Exiting Windo/I-Nv4 - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

2 Starting and Exiting WindO/I-NV4
Project Recovery Dialog Box
●
The Project Recovery dialog box is a feature to restore edited project data if your computer crashes while you were
editing. With this feature, you can return crashed the project to its last-saved state and restore project data that was
being edited. The Project Recovery dialog box is displayed if there is crashed project data when WindO/I-NV4 starts.
(Recovery data list)
(Recovery data list)
■
This list shows recoverable data for a crashed project.
Project Name: Shows the project name.
Last Save Time: Shows the date and time when the data was last saved.
Recover
■
Select the recovery data from the list and click this button to open the project data. The recovery data is deleted
when the project data is saved.
Delete
■
Deletes the selected recovery data.
Delete All
■
Deletes all recovery data.
Close
■
Closes the Project Recovery dialog box.
Recovery data is not deleted. The Project Recovery dialog box will be displayed again the next time WindO/I-NV4
starts.
If WindO/I-NV4 crashes in a state where you edit a screen and perform Save Screens after saving the
project data, the screen is not saved in the project data. Select the recovery data with the Project Recovery
dialog box and recover the project data.

2.2 Exiting WindO/I-NV4

Click and then click Exit WindO/I-NV4.
WindO/I-NV4 ends.
2-40
WindO/I-NV4 User's Manual