IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 82

3 Configuration & Functions
Online
●
Online is where you download created project data and files to the MICRO/I, where you upload data from the
MICRO/I, and where you perform monitoring.
Transfer
■
Command
Project Data
Files to External Memory
Download Device
Files to External Memory
Device while running
Project Data
Upload
Stored Data in External
Memory Device
MICRO/I
■
Command
Target Info.
All
Alarm Log Data
Data Log Data
Operation Log Data
Clear
Values from All Device
Addresses
Stored Data in External
Memory Device
Format
Monitors
■
Command
Start/Stop Monitor
Go Offline/Online
Screens
Object List
Custom
Batch
External Devices
Back
Forward
First Screen
Previous
Screen
Go to
Screen Number Switches to the Base Screen with a specified number.
Screen
Next Screen
Last Screen
Open Current Screens
2-50
Downloads project data to the MICRO/I.
Stops the MICRO/I and then downloads files to the external memory device inserted
in the MICRO/I. The MICRO/I resumes running when files have finished downloading.
Downloads files to the external memory device inserted in the MICRO/I without
stopping it.
Uploads project data from the MICRO/I.
Uploads data from the External Memory Device folder for the currently running
project.
Displays version information for the MICRO/I system software and project information.
Clears all of the data stored in the internal memory on the MICRO/I.
Clears all of the alarm log data stored in the internal memory on the MICRO/I.
Clears all of the data log data stored in the internal memory on the MICRO/I.
Clears all of the operation log data stored in the internal memory on the MICRO/I.
Clears the values from all device addresses.
Clears data saved to the external memory device inserted in the MICRO/I.
Formats the external memory device inserted in the MICRO/I.
Starts or stops monitoring the MICRO/I with WindO/I-NV4. An external device is required when
configuring it.
Switch the MICRO/I to Offline Mode or Online Mode. Under Offline Mode, you can change values
of device addresses with WindO/I-NV4 and check the operation of project data on the MICRO/I.
Shows or hides the Screen Monitor window.
Displays a value of device address in a popup and emphasizes the object that is satisfying the
trigger condition in the object list or script editor.
Shows or hides the Custom Monitor window.
Shows or hides the Batch Monitor window.
Shows or hides the External Device Monitor window during 1:N communication.
Returns to the Base Screen that was displayed immediately before the screen was changed.
Advances to the Base Screen that was displayed immediately before the screen was changed
with the Back command.
Switches to the Base Screen with the smallest screen number in the project data.
Switches to the Base Screen with a screen number one smaller than the Base Screen currently
displayed. If the screen numbers are not consecutive numbers, this command switches to the
closest number.
Switches to the Base Screen with a screen number one larger than the Base Screen currently
displayed. If the screen numbers are not consecutive numbers, this command switches to the
closest number.
Switches to the Base Screen with the largest screen number in the project data.
Opens a monitored screen in the editing window.
WindO/I-NV4 User's Manual
Description
Description
Description