Displaying Overlapping Drawings And Parts - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4 Drawings and Parts Overlapping

4.2 Displaying Overlapping Drawings and Parts

The display when drawings and parts overlap on base screens and popup screens varies based on the location where
they are placed.
Display order of overlapping parts
●
•If two parts overlap on a base screen or popup screen, the part last modified is displayed in the front.
Example: A Numerical Display is placed on the base screen and a Bit Button is placed in front of it.
•If two parts are overlapping each other on a base screen or popup screen, the part which is configured in the
Properties dialog box as a top layer, will keep displaying in the front.
Example: A Numerical Display is placed on the base screen and a Bit Button is placed on the top layer.
Bit Button
Top Layer
Numerical
Display
•If parts placed on the top layer overlap, the display order of the parts does not change.
Example: A Numerical Display is placed on the top layer and a Bit Button is placed in front of it.
Bit Button
Numerical
Display
Top Layer
6-6
Bit Button
Numerical Display
1234
Base Screen: 1
Changes the value
1234
Base Screen: 1
Changes the value
1234
Base Screen: 1
Changes the value
WindO/I-NV4 User's Manual
Object list
Display for Base Screen: 1
No.
1
1234
2
9999
Numerical Display is displayed in front
Object list
Display for Base Screen: 1
No.
1
1234 567
2
9999
The display order of Numerical Display
and Bit Button is unchanged
Object list
Display for Base Screen: 1
No.
1
567
1234
2
9999
The display order of Numerical Display
and Bit Button is unchanged
Type Layer
Numerical Display
Bit Button
Type Layer
Numerical Display
Bit Button Top Layer
Type Layer
Numerical Display Top Layer
Bit Button Top Layer