IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 578

1 Pilot Lamp
Example: When Action Mode is Flash (ON + Flash), Flash Trigger Device Address is M0, and on the Trigger
Condition tab, Trigger Type is While ON, Device Address is LM0
Trigger Condition: Device Address LM0 value
Action Mode: Value of Flash Trigger Device Address M0
The lamp will neither turn on or flash if the trigger conditions are not met. Lamp trigger conditions are
configured on the Trigger Condition tab.
9-4
0
0
Displayed drawing object
Displays OFF
Action
drawing object
WindO/I-NV4 User's Manual
1 1
0 1
Displays ON Displays OFF
Flashing
drawing object drawing object
0
1