IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 664

3 Picture Display
• Scale the size of the picture by values of device addresses and display it
Width D100=
Height D101=
Width D100=
Height D101=
Width D100=
Height D101=
When the size of pictures to switch differs and the Dynamic Size check box is cleared, all the pictures are
displayed with the same size as Pic0.
• Rotate the picture by values of device addresses and display it
This example shows a 0° start angle of rotation at the minimum value of 0 and a 90° end angle of rotation at the
maximum value of 100.
The pivot point of rotation is the position at X Point 0 and Y Point 500 from the center of picture.
10-58
External device
360
240
720
480
180
120
External device
D100=
0
D100=
50
D100=
100
WindO/I-NV4 User's Manual
MICRO/I
Scale picture to
W 360, H 240
Scale picture to
W 720, H 480
Shrink picture to
W 180, H 120
MICRO/I
Display picture
at same posi on
as when not rotated
Display picture
at posi on where it
has been rotated 45°
Display picture
at posi on where it
has been rotated 90°