IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 613

Input Method
■
These options specify the destination for entered values.
Destination Device Address:
Use Reference Device Address
*1
Always Entry Mode
■
Select this check box to enter values by pressing the keypad and key buttons without touching the Numerical Input
displayed on the screen.
To display 0 on the Numerical Input until a value is entered, select the Start from 0 in Always Entry Mode of
Numerical Input check box on the System tab in the Project Settings dialog box. To display the value of device
address, clear the Start from 0 in Always Entry Mode of Numerical Input check box.
This option can only be configured if Current Screen is selected for Type.
Example: When the Always Entry Mode check box is selected and the Start from 0 in Always Entry Mode of
Numerical Input check box is selected on the System tab in the Project Settings dialog box
Operations and display
Destination Device Address
Only one Numerical Input or one Character Input set to Always Entry Mode can be configured for one
screen.
Example: When the Always Entry Mode check box is cleared
Operations and display
Destination Device Address
*1 Advanced mode only
Specifies the word device to write the entered value to.
Click to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-68.
*1
: Select this check box and specify a device address to change the destination word
device by the value of this device address.
Click to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-68.
For details on indirect writing, refer to Chapter 2 "Indirect Read and Indirect Write
Settings" on page 2-5.
Enter a value
0
Display 0 Display value being entered
Action
(Entry mode) (Entry mode)
Value of
1234
Not displayed on Numerical Input.
Press Numerical Input
1234
Display value of
Display focus
Action
device address
(Entry mode)
(Display mode)
Value of
1234 1234
WindO/I-NV4 User's Manual
Press ENT
999 999
Write value to device address
(Entry mode)
1234 999
Enter a value Press ENT
1234 1234
Enter 999
Write value to
Display value of
device address device address
(Entry mode) (Entry mode)
1234 999
1 Numerical Input
999 999
Display value of
device address
(Display mode)
999
10-7
10