Properties Of Multi-Button Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

6.3 Properties of Multi-Button Dialog Box

This section describes items and buttons in the Properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
>>OFF Text, >>ON Text
■
Applies the text entered in the Part Name field to the Text field under the OFF or ON fields on the Registration
Text tab. This is used as the Registration Text when the button is OFF or ON.
To specify the Registration Text to use when the button is ON, select the Set by State check box on the
Registration Text tab. If left unchecked, the same Registration Text assigned for the OFF state is
displayed for the ON state as well.
Action Mode
■
Select the Action Mode for the Multi-Button: Momentary or Alternate.
Momentary: The button turns ON when pressed, and OFF when released.
Operation and
Alternate: The button switches between ON and OFF each time it is pressed.
Operation and
Press
view
Initial image
Action
ON
Press
view
Initial image
Action
ON
WindO/I-NV4 User's Manual
Release Press Release
OFF ON OFF
Release Press Release
OFF
6 Multi-Button
8
8-111