IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 788

9 Numerical Display
Options Tab
●
The Options tab is displayed in Advanced mode.
Display with Arithmetic Operation
■
To apply arithmetic operations to values of device addresses and writing the results, select this check box and input
the arithmetic formula.
Example: To multiple the value of device address when displayed by 60
External device
Arithmetic Formulas
Arithmetic formulas can be specified by freely combining multiple kinds of data and operators in the following format.
Data Operator Data
to
Data Operator Data
• There is no limit on the number of data items or number of operators. However, the maximum number is 120
characters.
• Round brackets can be used.
Data
Item
@
Value
Device Address
10-182
1234×60
D0 1234
Display value multiplied
by 60 for the value of
device address
Operator Data Operator
The device address on which the arithmetic operation is performed is specified in the arithmetic
formula. Only one device address can be set for an arithmetic operation.
The device address is as specified for Display Device Address under the General tab.
Sets the constant values for the arithmetic formula.
The values that can be set depend on the data type selected using Data Format under the General
tab. For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Specifies the bit device or the word device for the arithmetic formula.
Always enter the device address enclosed in square brackets, "[" and "]".
WindO/I-NV4 User's Manual
MICRO/I
74040
Data Operator Data Operator
Description
Numerical Input
Destination Device Address: D0
Display with Arithmetic Operation: @ * 60
...(up to 120 characters)
Data