IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 781

*1
With Unit
■
Select this check box to display units or other characters at the end of a number. Displayed characters must be
registered in Text Manager. The displayed text color will be as set for Text Color under the Format tab.
Text ID: Specifies the Text Manager ID No. (1 to 32000).
Click
Text: Displays the characters of the specified Text ID.
• The maximum number that can be displayed with this function is 4 characters. The fifth and subsequent
characters of a character string are not displayed. However, if Windows Font is set for the specified Text
ID characters all the characters are displayed.
• If a carriage return (CR) is included the characters after the CR are not displayed.
Windows Font
■
Configures the font to use as the Windows Font.
Select Windows for Font to display the current settings. To change the settings, click Change to display the Font
dialog box. For details, refer to Chapter 2 "Windows Font" on page 2-13.
Change Display Colors
■
Select this check box to switch the text and plate colors.
Trigger Device Address
Trigger Device Address
Trigger Device Address: Specifies the bit device or the bit number of the word device to use as the trigger to switch
Text Color:
Plate Color:
*1 Advanced mode only
to display Text Manager.
External device
0
1
the text and plate colors.
Click to display the Tag Editor. For the device address configuration procedure, refer to
Chapter 2 "5.1 Device Address Settings" on page 2-68.
When the value of device address is 0, the color specified in Text Color or in Plate Color
on the View tab will be displayed.
When the value of device address is 1, the color displayed and specified in Text Color or
Plate Color under the Change Display Colors.
Selects the color (color: 256 colors, monochrome: 16 shades) of the text when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.
Selects the plate color (color: 256 colors, monochrome: 16 shades) when switching.
Click this button to display the Color Palette. Select a color from the Color Palette.
This option can only be configured when Standard is selected for Image Type on the View
tab.
WindO/I-NV4 User's Manual
MICRO/I
Text Color
Plate Color on the View tab
1234
Text Color under Change Display Colors
Plate Color under Change Display Colors
1234
9 Numerical Display
10
10-175