Table of Contents
Advertisement
Play the specified movie:
Show and Play
■
Set Video Display's display setting and playback setting.
Full Screen:
The entire screen of MICRO/I is used as the display area of images and movie files.
Set Default to Full Screen:
Change by the value of Device Address: Select the check box and specify the bit number of a bit
Full screen can be ended with a Key Button (Restore). When the full screen ends with the Key Button, the
value of a device address set by the Change by the value of Device Address check box remains 1.
No Audio:
Select this to play movie files without sound.
Repeat:
Select this to repeat playback of a movie file.
This can only be set when Play a movie or recorded file from the File Screen, Play the Movie
File List, or Play the specified movie is selected in Action.
Autoplay:
Select this to automatically play movies when a Video Display is shown on the screen. When Display
images from the Video Input is selected for Action, movie files are always automatically played.
However, while data is being recorded after an event occurs with the event recording function, while
data is being recorded with a Key Button, Multi-Button, or Multi-Command configured with the
recording function, or while data is being saved to the external memory device, movie files are not
automatically played when the Video Display is shown on the screen.
Plays movie files by the order of the ID number.
Selects files to be played from the movie file list and then creates a list of files
to be played.
This can be set only when Play the specified movie is selected.
ID:
Displays the movie file list ID.
File Path:
Displays the file path of the movie file.
Add:
Adds a movie file (1 to 8) to the list.
Clicking this button opens the movie file list. Specify files using
the movie file list.
Delete:
Deletes files from the list.
Select a file from the list and then click this button. Movie files
deleted from the playlist will not be deleted from the movie file
list.
Up:
Shifts a selected file upward on this list.
Down:
Shifts a selected file downward on this list.
Select the check box to start with a display or playback on full
screen when the Video Display is displayed.
device or word device if you want to switch between display
in full screen or not using the value of a device address.
Full screen is displayed when the value of a device address is
changed from 0 to 1. Full screen ends when the value is
changed from 1 to 0.
WindO/I-NV4 User's Manual
4 Video Display
10
10-85
Hide quick links:
Advertisement
Table of Contents
