Properties Of Print Command Dialog Box - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

4.3 Properties of Print Command Dialog Box

This section describes items and buttons in the Properties dialog box.
General Tab
●
Part Name
■
Enter a name for the part. The maximum number is 20 characters.
Output to
■
Select where to direct the screenshot to.
*1
Printer :
External Memory Device
• For details about printers, refer to Chapter 32 "Printer" on page 32-1.
• For details about external memory devices, refer to Chapter 31 "External Memory Devices" on page 31-1.
Action Mode
■
Select the action to perform when the trigger condition is satisfied from the following. This option is only displayed
when Printer is selected in Output to.
Print Screen: Outputs a screenshot of the current screen to the printer or the external memory device.
*1
Cancel Printing : Cancels printout to the printer.
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F, USB flash drive for HG2G-5T and HG1G/1P
Outputs the screenshot to the printer connected to the MICRO/I.
Print Time Stamp: Adds the date and time of printing to the screenshot before
sending it to the printer.
The date and time format depends on the language selected in
Language. Language is available on the Project Details tab of
the Project Settings dialog box.
The display formats are shown below:
• Japanese: YYYY/MM/DD hh:mm
• English: MM/DD/YYYY hh:mm
YYYY: year, MM: month, DD: day, hh: hour, mm: minute
*2
: Outputs the screenshot as a file to the external memory device inserted in the MICRO/I.
Files are output as follows:
File format
CAP***.JPG (***: date and time when file was output)
JPEG Example: A file created at 18:50:25 on June 30, 2011 will
WindO/I-NV4 User's Manual
File name
be named "CAP110630_185025.JPG".
4 Print Command
12
File size
Depends on image
being displayed.
12-27