Bit Button Configuration Procedure - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

1.2 Bit Button Configuration Procedure

This section describes the configuration procedure for Bit Buttons.
1
On the Home tab, in the Parts group, click Buttons, and then click Bit Button.
2
Click a point on the edit screen where you wish to place the Bit Button.
3
Double-click the dropped Bit Button and a Properties dialog box will be displayed.
4 Change the settings on each tab as necessary.
The Trigger Condition tab and Options tab only appear in Advanced mode.
WindO/I-NV4 User's Manual
1 Bit Button
8
8-3