Library Hardware Configuration Changes - Spectra Logic T-Series Spectra T200 Supplementary Manual

L H
IBRARY ARDWARE
The library hardware is configured to ensure proper thermal control, air
flow, and dust filtering. After the library is installed, do not move the
library or change the drive configurations. Do not remove the protective
cover from the back of the library or any other library components (except
TeraPack magazines or RXT media packs).
In the event a change is required, make sure that you have instructions for
performing the procedure and either:
If you do not have a current support agreement and the relevant
documentation, contact SpectraGuard Technical Support (see
Spectra Logic on page
hardware.
See "Adding Capacity to Your Library" in the Spectra T200, T380, and T680
User Guide for information about enabling additional capacity in your
library.
November 2008
C
ONFIGURATION
You have been instructed to do so by SpectraGuard Technical Support.
– or –
You have a support contract such as Assisted Self-Maintenance (ASM).
6) before making any changes to your library
Note: The library's power cord is considered part of the library and
cannot be used with any other equipment.

Library Hardware Configuration Changes

C
HANGES
Spectra T200, T380, and T680 Library
Contacting
35