Chapter 7. Move Medium-A5H; Command Description; Table 7-1: Move Medium Command-A5H - Spectra Logic Spectra S50 User Manual

T-series and 50-series

Table of Contents

Move Medium—A5h

The MOVE MEDIUM command asks the library to move media from one element location to

another. The locations are identified by their element addresses.

The MODE SENSE data contains a matrix with the valid element source-destination

combinations for the MOVE MEDIUM command, as described in Table 6-6: Device

Capabilities Fields Format–1Fh on page 32. Send a READ ELEMENT STATUS command to the

library to find out current element addresses and which elements contain media. The

table below shows the CDB for the MOVE MEDIUM command.

Table 7-1: Move Medium Command–A5h

Bits

Byte

(MSB)

These bits are ignored.

There is no movement allowed to the robotic picker (medium transport element).

Operation Code (A5h)

Obsolete

Transport Medium Address

Destination Address

Reserved

Source Address

Reserved

(LSB)

Invert

Table of Contents

Need help?

Do you have a question about the Spectra S50 and is the answer not in the manual?

T120 T50 T950