Move The Media - Spectra Logic T-Series Spectra T200 User Manual

Chapter 5 — Importing, Exporting, and Moving Media

Move the Media

Use the following steps to move the media from one location to another
within the library:
1. Select the media you want to move as described in
2. From the Destination drop-down menu (see
114
User Guide
To select media using its slot number:
a. Enter the slot number for the cartridge you want to move from
Step 1 on page 112
b. Select Go. The Source inventory list refreshes to show the requested
slot selected at the top of the Source list.
To select media using its bar code label information:
a. Enter the bar code label information from
Find by Barcode field.
Note: Make sure that you type the bar code label information correctly
to avoid selecting the wrong cartridge.
b. Select Find. The Source inventory list refreshes to show the
requested media selected at the top of the Source list.
Media.
of location to which you want to move the media, then select Go.
Available destinations
Figure 54 Select the Destination for a media move.
in the View Source Slot field.
Step 1 on page 112 in the
Locate the Desired
Figure 54), select the type
91090000