Move Cartridges Within The Library - Spectra Logic T-Series Spectra T50e User Manual

6. Select Start Moves and wait for the library to complete the move. A
7. Select Finish to complete the operation.
8. Remove the cartridge from the access port.
9. Push the door in until it latches closed.
M C
OVE ARTRIDGES
During normal operations, you typically use your backup software to
move cartridges from one location to another within the library. However,
you may occasionally need to use the library's user interface to locate and
move an individual cartridge (for example, to move a cleaning cartridge to
a tape drive).
1. From the toolbar menu, select General > Inventory. The Inventory
December 2008
Select Delete Selected to go back one step
Select Delete All to start over
Toggle between Show Slots and Show Barcodes, as needed
Figure 81 Move cartridge action screen.
progress bar displays while the move occurs.
Note: Do not use force to close the door.
W
ITHIN THE
screen displays.
Figure 82 Moving cartridges in the library–step 1.

Move Cartridges Within the Library

L
IBRARY
Spectra T50e library
111