Exporting Or Exchanging Cartridges In A Cleaning Partition - Spectra Logic T-Series Spectra T200 User Manual

Chapter 5 — Importing, Exporting, and Moving Media

Exporting or Exchanging Cartridges in a Cleaning Partition

The steps for exporting or exchanging cleaning cartridges in a cleaning
partition are the same as for a data partition, except that the magazine
containing the cartridges is moved directly to the TAP.
Use the following steps to export or exchange cleaning cartridges in a
cleaning partition.
1. Select General > Import/Export from the toolbar menu on the library's
2. From the Partition drop-down menu, select the cleaning partition
3. Select the Export/Exchange or Export/Exchange Expired.
108
User Guide
user interface. The Import/Export TeraPack Cases screen displays
(Figure 48 on page 105).
Note: The General > Import/Export option is only available when
accessing the user interface from the library front panel. It is not
available when accessing the library's user interface through a
remote connection to the RLC.
containing the cleaning cartridges you want to export or exchange, then
select Go.
The Import/Export TeraPack Cases screen refreshes to show the current
status of the chambers assigned to the selected cleaning partition.
The Import, Export/Exchange, and Export/Exchange Expired
Note:
buttons on the Import/Export TeraPack Cases screen display
only if those actions can be performed given the current
inventory for the partition. For example, if the cleaning partition
does not contain any known-expired cleaning cartridges, the
Export/Exchange Expired button is not displayed.
Figure 49 Exporting/exchanging cleaning using
the Import/Export TeraPack Cases screen.
The transporter retrieves a magazine from the cleaning partition and
places it in the TAP. The TAP door opens and a Feedback Required
screen displays. If you selected Export/Exchange Expired, the feedback
screen tells you which cartridge to remove from the magazine.
91090000