Canon imagePRESS 1135 Series Service Manual page 1215

COPIER > OPTION > FEED-SW
YP-ROT ON/OFF of image rotation in PDL print
Lv.2 Details In PDL print, the image is not rotated at printing even through the
image and the paper orientation does not match in case that the user
definition size paper is used. (In case of standard size, the image is
rotated in line with the paper feed direction.)
When "1: ON" is set, the image is rotated in line with the paper feed
direction and printed.
Use case When the image failure of different image direction occurs in case
that the user definition size paper is used in PDL print
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
IDX-MODE ON/OFF tab print with non-CPCA command
Lv.2 Details To set whether to move an image in the tab direction to print a tab
when a index paper is specified with non-CPCA command (internal
PS command).
Use case When fails to print a tab of index paper with non-CPCA command
only
Adj/set/operate method Enter the setting value and press the OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
TFL-RTC Set delvry dest at rcvry after tray full
Lv.1 Details To select the delivery destination for a job with multiple pages after
recovering the delivery tray that reaches the full level.
When 0 (default) is set, a job is output from the delivery destination
again from which the last job was delivered.
When 1 is set, a job is output from the delivery destination which
priority is set as high at "Output Tray Settings" in user mode.
Use case When changing the delivery tray
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Output from the tray from which the last job was output.
1: Output from the delivery destination which priority is high among
the delivery trays.
Default value 0
Related user mode Function Settings> Common> Paper Output Settings> Output Tray
Settings
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
COPIER > OPTION > FEED-SW
D-MXDSZ Prdctvty prrty mod in media mix: 2-sided
Lv.1 Details At a 2-sided job in media mixed situation, productivity is reduced
because paper circulation inside of the machine is stopped.
When 1 (productivity priority mode) is set, productivity improves
because paper circulation is not stopped.
Use case Upon user's request (Improving productivity in media mixed situation)
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 0 to 1
0: Normal mode, 1: Productivity priority mode
Default value 1
DK-FANSW Set airflow amount of Side Paper Deck
Lv.2 Details To set the airflow amount of the Side Paper Deck.
Do not set "1: Special setting" at the normal service. When 1 is set,
replacement/addition of parts to the Deck Unit will be required at the
same time.
Use case Do not set 1 at the normal service
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Do not set 1 at the normal service. When 1 is set, replacement/
addition of parts to the Deck Unit will be required.
Display/adj/set range 0 to 1
0: Normal setting, 1: Special setting
Default value 0
DUP-TAB Set 1-sided/2-sided feed of tab paper
Lv.1 Details To set whether to perform 2-sided feed or 1-sided feed for tab paper
at the time of 2-sided printing.
When 1 is set, 2-sided feed is performed for tab paper at the time of
2-sided printing, so productivity is improved.
When 2 is set, 2-sided feed is performed even when making the
punch hole in tab paper.
Use case When prioritizing the productivity of 2-sided tab paper print
Adj/set/operate method Enter the setting value, and then press OK key.
Caution - If TBTP-PRT is 0 although 1 is set for this item, 1-sided feed
is performed when delivering to the Stacker, so productivity is
decreased.
- Although 1 is set, 1-sided feed is performed when making the
punch hole with the connected Professional Puncher.
Display/adj/set range 0 to 2
0: 1-sided feed, 1: 2-sided feed, 2: 2: 2-sided feed (when using the
Professional Puncher)
Default value 1
Related service mode COPIER> OPTION> FEED-SW> TBTP-PRT
8-272
8-272