Test (Test Print Mode) - Canon imagePRESS 1135 Series Service Manual

COPIER> OPTION> ACCPST-P
ACC4 Set of pickup option connection order
Lv.1 Details Setting of connecting order for pickup options to be connected with
ARCNET.
Use case • At the time of installation
• When replacing DC controller PCB/at RAM clear
Adj/set/operate method 1) Check where is ACC 4 option in the connecting order from the
host machine.
2) Enter the order (number), and then press OK key.
3) Turn OFF and then ON the main power of the host machine and
the options.
Display/adj/set range Type: 8 characters
Node ID: 8 digits
Order: 2 digits
Supplement/memo Pickup options to be connected with ARCNET: POD deck, secondary
POD deck
8
Service Mode > COPIER > TEST (Test Print Mode) > PG
T-8-79
8 Service Mode > COPIER > TEST (Test Print Mode) > PG

TEST (Test Print Mode)

■ PG
COPIER> TEST> PG
TYPE Test print
Lv.1 Details Executing test prints
Use case At the time of trouble analysis
Adj/set/operate method Enter the setting value, and then press Start key.
Test print is executed.
Caution Be sure to put back the value to 0 after test print output.
Display/adjust/set range 0 to 50
0: Normal print
1: Grid
2: 17 gradations Tbic rank 2
3: 17 gradations 600dpi (134-line screen or 141-line screen)
4: Solid white
5: Halftone (density: 80H, Tbic rank 2, without image correction)
6: Halftone (density: 80H, 134-line screen or 141-line screen, without
image correction)
7: Solid black
8: Horizontal line (4 dots, 27 spaces)
9: Horizontal line (6 dots, 50 spaces)
10: Horizontal line (2 dots, 3 spaces)
11: Halftone (density: 60H, Tbic rank 2, without image correction)
12: Halftone (density: 80H, 134-line screen or 141-line screen,
without image correction)
13: Halftone (density: 30H, Tbic rank 2, without image correction)
14: Halftone (density: 30H, 134-line screen or 141-line screen,
without image correction)
15-50: For development
Default value 0
Required time Several seconds
TXPH Setting of test print image mode
Lv.1 Details Setting of image mode at the time of test print output
This mode is enabled for test print only
Use case At the time of trouble analysis
Display/adjust/set range 0 to 4
0: Error diffusion
1: Low-line-count screen (approx. 133 to 190-line)
2: High-line-count screen (approx. 200 to 268-line)
3: Copy screen (approx. 220-line)
4: REOS screen (no screen structure)
8-323
8-323