Canon imagePRESS 1135 Series Service Manual page 1316

COPIER> COUNTER> H-DRBL-2
TN-FD-MR Toner collection motor parts counter
Lv.1 Details Target parts: Waste toner stirring motor (M69), waste toner feed
motor (M76)
1st line: total counter value from the previous replacement
2nd line: estimated life
Use case When checking the consumption level of parts or replacing the parts
Adj/set/operate method To clear the counter value: Select the item and press the Clear key.
To change the estimated life: Select the item, enter the value and
press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Appropriate target value 0
HOP-MTR Hopper stirring motor parts counter
Lv.1 Details Target parts: Hopper stirring motor (M68)
1st line: total counter value from the previous replacement
2nd line: estimated life
Use case When checking the consumption level of parts or replacing the parts
Adj/set/operate method To clear the counter value: Select the item and press the Clear key.
To change the estimated life: Select the item, enter the value and
press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Appropriate target value 0
DL-A-RL Delivry unit inner feed rollrA prts cntr
Lv.1 Details Target parts: Duplexing feed roller1, delivery roller 2
1st line: total counter value from the previous replacement
2nd line: estimated life
Use case When checking the consumption level of parts or replacing the parts
Adj/set/operate method To clear the counter value: Select the item and press the Clear key.
To change the estimated life: Select the item, enter the value and
press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Appropriate target value 0
8
Service Mode > COPIER > COUNTER > PD1-SW
T-8-92
8 Service Mode > COPIER > COUNTER > PD1-SW
■ PD1-SW
COPIER> COUNTER> PD1-SW
PRM-W-A Switch dspl: Primry charging wire counter
Lv.1 Details Set whether or not to display the primary charging wire right/left unit
in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> PRDC-1> PR-WI-U1, PR-WI-U2
PO-WIREA Swtch dspl: Pre-pri trns chrg wire unitCT
Lv.1 Details Set whether or not to display the pre-primary transfer charging wire
unit in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> PRDC-1> PO-WI-U
8-373
8-373