Canon imagePRESS 1135 Series Service Manual page 1183

COPIER > OPTION > DSPLY-SW
IMGC-ADJ Disp/hide of img adj item in user mode
Lv.1 Details Setting to display/hide the item relating to image adjustment in User
Mode
When selecting display setting, detailed image adjustment procedure
will be displayed only for the duplicated paper specified with the
following management settings: Additional Functions> System
Settings> Device Management Settings, Paper Type Management
Settings
Use case As needed basis.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 0
Related user mode Additional Settings> System Settings> Device Management Settings,
Paper Type Management Settings
UI-RSCAN Disp/hide of remote scan screen
Lv.2 Details Setting to display/hide the remote scan screen to the control panel.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 1
UI-EPRNT Disp/hide of extended print screen
Lv.2 Details Setting to display/hide the extended print screen (print screen for
print server).
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 1
UI-WEB Disp/hide of Web browser screen
Lv.2 Details Setting to display/hide Web browser screen.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 1
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > DSPLY-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > DSPLY-SW
COPIER > OPTION > DSPLY-SW
UI-HOLD Disp/hide of screen for Hold
Lv.2 Details Setting to display/hide screen for Hold.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 1
OPEMANT ON/OFF of operator maintenance mode
Lv.2 Details ON/OFF setting of operator maintenance mode.
Selecting ON displays "Operator Maintenance Mode" on Additional
Functions screen.
Use case When starting the operator maintenance
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Additional Functions> Operator Maintenance Mode
OPLOG-SW Disp/hide of error logs etc. in OM mode
Lv.2 Details Setting to display/hide error/jam/alarm-2 log in Operator Maintenance
mode.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 0
OP-ALMT Set of warning display timing in OM mode
Lv.2 Details Setting for the timing to display warning message for replacing the
parts/cleaning the counter in Operator Maintenance mode.
Selecting this mode enables display of the warning message a little
before the counter reaches the specified parts life/the number of
sheets for counter cleaning.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: When reaching 100 %, 1: When reaching 90 % and 100 %
Default value 0
8-240
8-240