Canon imagePRESS 1135 Series Service Manual page 1151

■ MISC
COPIER> ADJUST> MISC
SEG-ADJ Set of criteria for character/photo
Lv.1 Details To set the judgment level for characters/photo originals in character/
photo/map mode.
As the value is increased, originals tend to be detected as photo
original and as the value is decreased, originals tend to be detected
as character original.
Use case When adjusting the classification level of character and photo in
character/photo/map mode.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -4 to 4
Default value 0
K-ADJ Set of criteria for black character
Lv.1 Details To set the judgment level of black characters at character processing.
As the value is increased, characters tend to be detected as black.
Use case When trying to set value in which originals tend to be detected as
black color.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -3 to 3
Default value 0
ACS-ADJ Set of criteria for B&W/color in ACSmode
Lv.1 Details To set the judgment value of B&W/color in ACS mode.
As the value is increased, originals tend to be detected as B&W and
as the value is decreased, originals tend to be detected as color.
Use case When adjusting the color detection sense in ACS mode.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -3 to 3
Default value 0
ACS-EN Set of ACS mode judgment area
Lv.2 Details To set the judgment area for ACS mode.
As the greater value is set, the judgment area is increased.
Use case When adjusting the ACS judgment area.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -2 to 2
Default value 1
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > MISC
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > MISC
COPIER> ADJUST> MISC
ACS-CNT Set of ACSmode judgment pixel count area
Lv.2 Details To set the area for counting the pixel to judge the color existence in
ACS mode.
As the greater value is set, the judgment area is increased.
Use case When adjusting the count area to judge the color existence in ACS
judgment mode.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -2 to 2
Default value 0
ACS-EN2 Set of ACSmode judgmnt area in DADF read
Lv.2 Details To set the judgment area for ACS mode in DADF reading.
As the greater value is set, the judgment area is increased.
Use case When adjusting the ACS judgment area in DADF reading.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -2 to 2
Default value 1
ACS-CNT2 Set ACS judgmnt pixel count area in DADF
Lv.2 Details To set the area for counting the pixel to judge the color existence in
ACS mode in DADF reading.
As the greater value is set, the judgment area is increased.
Use case When adjusting the count area to judge the color existence in ACS
judgment mode.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power.
Display/adjust/set range -2 to 2
Default value 0
8-208
8-208