Canon imagePRESS 1135 Series Service Manual page 1122

COPIER> ADJUST> DENS
TSDE0202 Adj of E020-0102 occurrence criteria
Lv.2 Details To adjust the criteria of error that is triggered when the toner supply
to the sub hopper is short.
As the value is changed by 1, judgment threshold value is increased/
decreased by 10 %.
+: increase
-: decrease
As the value is larger, the criterion of error becomes higher and
errors occur less frequently (white spots images occur more
frequently).
As the value is smaller, white spots occur less frequently.
Use case • When E020-0102 occurs frequently.
• When white spots image occurs.
Caution • Check that the toner stuck/toner sensor connection failure/cut wire
do not occur beforehand.
• Change the setting value -/+1 by 1 and check the result each time.
Display/adj/set range -3 to 3
-3: 30 % decrease, -2: 20 % decrease, -1: 10 % decrease, 0: 0 %, 1:
10 % increase, 2: 20 % increase, 3: 30 % increase
Unit 10 %
Default value 3
Related service mode COPIER> ADJUST> DENS> TSD-BFR, TSD-DEV, TSD-HFR,
TSDE0201
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > BLANK
T-8-37
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > BLANK
■ BLANK
COPIER> ADJUST> BLANK
BLANK-T Adj of lead edge margin
Lv.1 Details To adjust the margin on the leading edge of paper.
As the value is increased by 1, the margin is shifted toward the
center of the paper by 1 pixel (0.0847 mm).
Use case • When reducing the margin due to user's request.
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1181
Unit 1 pixel
Appropriate target value 29
Default value 29
BLANK-L Adj of left edge margin
Lv.1 Details To adjust the margin on the left edge of paper.
As the value is increased by 1, the margin is shifted toward the
center of the paper by 1 pixel (0.0847 mm).
Use case • When reducing the margin due to user's request.
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1181
Unit 1 pixel
Appropriate target value 29
Default value 29
BLANK-R Adj of right edge margin
Lv.1 Details To adjust the margin on the right edge of paper.
As the value is increased by 1, the margin is shifted toward the
center of the paper by 1 pixel (0.0847 mm).
Use case • When reducing the margin due to user's request.
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1181
Unit 1 pixel
Appropriate target value 29
Default value 29
8-179
8-179