Environment Control; Related Service Modes - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > External Auxiliary System > Controls > Power supply control
<Environment Control>
Environment control 1: The condition of the heater at the time of turning OFF the main
power continues.
Environment control 2: Whether to turn ON or OFF the heater is determined by the
environment (moisture content) right before moving to sleep state, and the condition
continues while the power is OFF or the machine is at sleep state.
Environment Moisture content
1 0.86
2 1.73
3 5.8
4 8.9
5 15
6 18
7 12.41
Environment control 3: Basically the heater is ON. ON or OFF of the heater can be
switched depending on the moisture contents when the duration time of standby mode/
energy saving mode is long (4 hours at minimum).
<Related service modes>
COPIER > OPTION > IMG-MCON > DRM-H-SW: To set ON/OFF of the Drum Heater.
0: Normal mode (ON/OFF of the Drum Heater is determined when moving to sleep 1.)
(Default)
1: Drum Heater ON mode *(The Drum Heater must be turned ON when moving to sleep 1
while the 2-dimensional shading-related control is OFF.)
2: Energy saving mode (The Drum Heater is OFF when moving to sleep 1.)
* The mode differs from 2-dimensional shading ON (image priority mode). This mode is for
users who just want to turn ON the Drum Heater when startup time is delayed because of
the increase of controls due to 2-dimensional shading ON.
COPIER > OPTION > IMG-LSR > 2D-SHADE: Image priority mode (2-dimensional
shading). ON/OFF
0: 2-dimensional shading OFF (Default)
1: 2-dimensional shading ON (The Drum Heater is turned ON at first time for the day, sleep,
standby/energy saving, potential control, and 2-dimensional shading.)
2
Technology > External Auxiliary System > Controls > Power supply control
Temperature/Humidity Drum Heater
23 deg C 5% OFF
23deg C 10%
23 deg C 30%
23 deg C 50%
23 deg C 70% ON
27 deg C 80%
30 deg C 80%
T-2-90 T-2-90
2-162
2-162