Setting For Login By Rls Authentication - Canon imageRUNNER ADVANCE 8105 Series Service Manual

2
Technology > MEAP > Setting the method to login to SMS > Setting for login by RLS Authentication
3) Click [Start] or [Stop] button shown in Status field of SMS Installer Service (Password
Authentication) to check if the status is changed.
4) Logout once and login again to check to see that the setting is applied properly.
When clicking [Stop] to change the status to [Start], another password authentication login
screen is firstly shown. When trying to access the password authentication screen after
clicking [Start] to change the status to [Stop], the user is automatically redirected to RLS
authentication screen.
Password authentication started screen and Password authentication stopped screen
2
Technology > MEAP > Setting the method to login to SMS > Setting for login by RLS Authentication
■

Setting for login by RLS Authentication

The procedures for changing the RLS authentication Start/ Stop settings are as follows.
1) In order to make a setting for Login by RLS Authentication, you need to Login by Password
Authentication.
URL: http://<IP address of MEAP device>:8000/sms/rls/
Ex.) http://172.16.188.240:8000/sms/rls
Login screen by Password Authentication
F-2-226 F-2-226
2) Select [System Application Management] on System Management menu.
F-2-227 F-2-227
2-177
F-2-228 F-2-228
F-2-229 F-2-229
2-177